Toyota Tundra Over-hauled to 99% Perfection + Ceramic Pro Coating

We at Detail Boss strive to exceed not only our clients' expectations, but our own. This thrashed Toyota Tundra did just that. With both sides completely scratched via rocks, branches, and improper washing techniques, this big girl was in some serious need of the Boss Touch. Pictured below are some before shots of the condition of the paint prior to our magic.

Complete sanding was performed on both sides to knock down 90+% of the defects, some spots going as low as 800 grit to remove deep scratches. Followed by numerous stages of compounding and polishing to jewel the metallic blue to a crystal clear and brilliant finish, well, the results speak for themselves.

Beginning stages of color sanding scratches

Post-sanding and compounding prior to polish and Ceramic Pro coating application

Topped with Ceramic Pro 9H and Light, this beautiful truck will be protected from the Arizona sun for years to come. For more about Ceramic Pro, click here

We are Arizona's Premier Auto Detailing Company and Certified Ceramic Pro Installation Center

Enjoy the after photos below!

Ceramic Pro 9H Glass Protective Coating Explained

Ceramic Pro is the trusted name in Ceramic Coatings. It's not just a glass coating, it's a ceramic coating with permanent bonding. Ceramic Pro 9H has above 9H scratch resistance, stands up to 2192 degrees Fahrenheit, is chemical resistant and super hydrophobic. It also adds extreme gloss and color enhancement and anti-graffiti properties. These claims and properties are all verified by SGS.

It has scratch resistance of 9H on pencil test. That doesn't mean that it the coating can't be scratched however that it has the hardness of 9H and even above 9H. The coating is a sacrificial layer to protect the paint so the paint isn't as susceptible to getting scratched as easily. It is multi layer-able so more layers can be added to build a thicker barrier and get even better protection. This is the hardest coating on the market today and if you get a scratch it will most likely be in the coating instead of destroying your paint.

World's Fastest Half Mile Porsche Paint Corrected and Ceramic Pro coated for SEMA 2015

The world's fastest half-mile Porsche entered Detail Boss's doors in need of some major reconditioning. Built by Evolution Motorsports, the 2007 Porsche 997 Twin Turbo is world-renown for going 219.30 MPH in the standing 1/2 mile. Equipped with Evolution Motorsports EVT1700 Package, this German rocket is truly one-of-a-kind. Jeweled to a show-car finish, this racecar became a show-car for the SEMA 2015 show held at the Las Vegas Convention Center.

We started off the process when the car was dropped off to our shop courtesy of our client. We cleaned the exterior, wheels and calipers via hot high pressure steam. We removed all paint protection film from the front of the car which was original from 2007, all vinyl and decals to ensure the paint surface was bare for the next step: paint correction.

Deep Steam-Cleaning Engine Compartment

Our Concours finish paint correction was performed next. This consisted of spot-wet-sanding deep scratches followed by multiple compounding, polishing, and jeweling steps to ensure maximum defect removal and the ultimate shine. Upon reaching the final stages, it was particularly important to stress the delicate fashion in which way we wiped off the polish, as well as the type of microfiber towel used to prevent any towel-scratching or marring to Porsche's notoriously soft paint. We also 3 stage paint corrected the door jambs to remove imperfections.

Paint Protection Film and Vinyl Removal on Front Bumper

Hood: Before paint correction

Hood: After 2 stages of Paint Correction

Upon completion, we installed 3 layers of Ceramic Pro 9H, and 1 layer of Light to all exterior painted surfaces. We also coated the HRE wheels with Ceramic Pro Wheel & Caliper.

Hauled in an enclosed trailer to Las Vegas Nevada, heads turned and cameras came out as the world-record Porsche was started and pulled into the Flex Tools booth inside the convention center for the world to see. We wanted to prove that a race car can be a show car. Our client's EVT1700 Porsche 997 built by Evolution Motorsports did just that. Sit back, grab some popcorn, and enjoy the video showcasing this beautiful transformation.

Shout-out to Ceramic Pro for the sponsorship of product for this event. Also a thank you to Bob and Andreas of Flex Tools for having the car in the Flex booth all week long! You guys Rock! Thanks to Evolution Motorsport for your loyalty with our brand and company and for promoting us through various events, social media and to your clients! For more on Evolution Motorsports, click here. Thank you to Evolutionized Photography for the stunning photos, always! To follow and keep up with what we do, 'Like' Detail Boss Facebook Page here.